Saturday, December 12, 2020

Progress on the Gateway Spur: Working at Weller Beer

Weller Beer is the first named industry on the layout. I’ve decided to name them after childhood places and streets in my hometown of St. Catharines, Ontario.

Weller Beer is named after Port Weller, the Lake Ontario entrance to the Welland Canal. It was located near my home; I spent many happy hours there watching the ships come and go.

 It’s the biggest industry on the Gateway Spur, with three tracks. Two are for inbound commodities of corn syrup and barley (tank cars and covered hoppers), and one with three spots for outgoing pallets of beer (boxcars).

There is also a team track beside the brewery, which can receive different kinds of cars.

Weller Beer is also the first part of the layout where I did some of the first scenery work—paint the tracks, ballasting and ground cover.

It’s still only basic, but it’s getting there. I will want to add more details, including lots of details to the structure itself.  

The backdrop is still an issue; it’s green! I have thought about backboard, or maybe I just don’t care. It’s about operating the trains. And I could get some software to add a sky for photos. We’ll see . . .


Wednesday, November 25, 2020

Back in the Train Room or, The Gateway Spur is Back


The Gateway Spur is back! Or maybe it’s more correct to say I’m back with the Gateway Spur. 

The layout never went away. But it has been dormant since March when the pandemic started. Somehow, I just lost interest in the hobby as the first wave of the virus swept North America. 

Then, when summer came, I spent most of my time outdoors biking and doing other things. I spent no time in the basement. 

Plus, there were plans to renovate the old train room—put in a new floor, paint and turn it into a spare bedroom/hobby/whatever room.


To get the room ready, I had to take down all the buildings for painting and put many other things away. 

But that’s all done now. I’m back working on the layout. It feels good. 

To reiterate (since it’s been so long since I last posted about it), the Gateway Spur is a short freelanced industrial layout along three walls of the room. 

It replaces the old CP Rail Manitoba & Minnesota Sub., after which this blog is named. In fact, it uses two sections of the upper level of the old layout; so, in a way, the M & M Sub. lives on. 

Set in the late 1980s, the idea behind it is seven industries (and team track) are located on a spur on the outskirts of a larger urban centre. They are serviced by a switch job that originates in the urban centre (fiddle yard) as an out-and-back operation. 

Train lengths are 4-5 cars, plus a caboose. 

Industries along the line are not yet fully determined, but so far I have a plastics business, a mill, a brewery, team track and several manufacturing companies. 

The brewery, with three tracks, is the largest industry on the line. 

I use a simple homemade card system to determine which industries get switched during each session. 

Over the past few weeks I’ve been troubleshooting the layout, getting things ready for scenery and ballasting. (There's still lots to be done to the buildings, including some repair.)

Unlike my previous layout, which featured a busy mainline with perfect track (or as perfect as I could make it), a little unevenness, crookedness and rocking-and-rolling by the train is perfectly acceptable on the Gateway Spur! 

One thing I haven’t decided yet is whether I will bother with a backboard for a blue sky. One of the compromises with “management” was going with the preferred colour for the room (green). I might get software that enables me to add a sky to photos. We’ll see. 

Also, the fascia will be painted a green trim different from the wall colour. That will have to wait until its safe to go to a paint store again. (We are in code red lockdown in Winnipeg now.) 

But I’m in no rush to finish anything; with such a small layout (compared to my earlier one, which filled the room and took decades to complete), it would be too easy to complete things. And then what? 

Slow as she goes is the watchword; sort of like how trains operate on the Gateway Sub. 

And maybe a bit of rocking and swaying, too.

Friday, August 7, 2020

Rewind: York Railway Modellers, a Great Canadian Model Railroad:

As I wrote earlier, this pandemic has got me down. It's hard to work on the layout, or come up with fresh content for the blog. But I have lots of interesting content from years past which could be shared again, like this post from 2012. Enjoy! 

Another great Canadian model railroad I had the pleasure of helping to get published is York Railway Modellers.

The club, which is located in Toronto, started in 1992. The HO scale layout combines CNR and CPR mainline and wayfreight operation in southern Ontario between 1953-57.

The layout is over 1,600 square feet in area and has around 11 scale miles of mainline track. It features two major yards and eight towns. Each yard has three industrial areas plus a roundhouse, turntable and engine facilities.

The single track mainline runs from is set up to run end-to-end from the CPR Lambton Yard (West Toronto) to the CNR London Yard. A total of 25 people are required to operate it properly.

Today the club has finished all the trackwork and 95 percent of the wiring; work on scenery is a continuing project.

York Railway Modellers was featured in Canadian Railway Modeller Train 7 Track 4. Photos from the club’s website and Scott Reid. Click here to visit their website. A few more photos are below.

Sunday, July 5, 2020

COVID-19, Model Railroading and the Gateway Spur

Like many other things during the pandemic, the Gateway Spur has been shut down.

Unlike the real world, it wasn’t loss of traffic or customers or supplies or even to prevent the transmission of the virus.

It was simple loss of interest and energy.

It’s not like I wasn’t busy at other things; as a religion reporter for my local newspaper, my work continued unabated as I reported about the impact of the pandemic on faith groups.

And the little NGO I work part-time for had to do all sorts of recalibrations to adjust to the new reality.

I also started biking more, an hour or so each evening to stay fit and keep my mind off the loss of so many things because of the (stupid) pandemic.

I also read 8 or 9 books—a record for me. In normal times, it can take me a month to get through one.

But in other ways, the pandemic really weighed on me. Sports, concerts, festivals and so many other events all cancelled. Even if I was never going to go to or take in them all, I felt their absence keenly.

It was a sort of existential loss, a void that seems to last forever.

This lack of energy carried over to model railroading, I found it hard to be motivated to do anything on the layout.

I went down to the train room only a few times to run some trains—never mind think about doing scenery.

For me, the energy for the hobby just wasn’t there. Or for this blog, which I haven’t updated since April 22.

Am I the only one who felt this way?

I know some haven’t. People like Jason Shron of Rapido Trains has used the time at home productively to make some brilliant scenery on this layout. 

Which is amazing, considering he was also trying to keep his company afloat and keep three kids busy at home at the same time.

Others on the Canadian Railway Modellers group have posted photos of their modelling during the pandemic.

Since he’s in the higher-risk age group for catching the virus, Kevin Day stayed inside completed two kits he bought about 35 years ago.

Jon Calon of Calgary found a silver lining in the pandemic, noting a lot of sign shops and places that produce the clear sneeze guards are likely to be awash in scraps of material.

"Those scraps work wonderfully for model railway owners wanting to protect details and rolling stock close to the edge of the layout," he wrote.

"I just scored (free!) a couple of 8' long chunks of clear polycarbonate that are about 10" tall." 

Daniel Charest used the lockdown to add a mine to his N scale layout. This area was a piece of plywood before the pandemic started.

Nick Eh used the "COVID crap" time, as he called it, to model CP GP38-2 3031, a unit that brought back good memories from when he was a kid.

And good on John Strickland and the Mississippi Valley Associated Modelers in the Ottawa area found a way to combine social distancing with running trains by setting their modules up outside.

As for me, maybe things will change in fall modelling-wise. Summer always was a slow time, anyway. Perhaps things will be different in the fall for the pandemic and my energy. We can only hope.

Wednesday, April 22, 2020

Winnipeg Pandemic Virtual Layout Hop

In spring, the Winnipeg Model Railroad Club sometimes has a layout hop—visiting local layouts. Since we can do that during the pandemic, how about a virtual hop? I’ve assembled a list of links to Winnipeg layouts featured on my blog.

The good thing about a virtual layout hop is no driving between layouts, or trying to choose which ones to see based on time available. And best of all, even though many of these layouts no longer exist they can still be visited this way. Enjoy!

First up is Arnold Walker’s HO scale Northland Route, which was one of the premiere layouts in the city. And because there is so much to see on Arnold’s layout, you may need more time. So take a second look at the Northland Route.

Next is Stafford Swain’s HO scale CN Whiteshell Subdivision, including tributes to Stafford. (Who passed away in  2018.)

After that, let’s head over to George Meyer’s O Scale Central Northern Subdivision. George was in N and HO scales before settling on O scale and making this fabulous layout. He passed away in 2019.

Back to HO scale with The Carson and Cobourg,  a layout build by two friends—Marvin Fetch and Vern Gibson.

No visit to layouts in Winnipeg is complete without going to fall in Pennsylvania! That’s the theme of Ron Loewen’s O scale layout, built in a room above his garage.

The Miller Creek Forestry Museum layout started life in B.C., but now makes its home in Winnipeg. Take a look at this amazing ON30 layout!

Wonder what a layout built on four levels looks like? One that goes all around a basement, including through a bedroom and rec room? Then you have to stop by Ken Epp’s Cougar River Subdivision! Ken passed away in 2014.

If four levels isn’t enough, what about five? You can’t miss Ray Goy’s Twin Lakes Terminal & Transfer Railroad, a monster layout on five levels that completely (and I mean completely) filled Ray’s 1,250 square foot basement.

Since it’s spring, maybe the Assiniboine Valley Railway is in operation! Nothing like a ride on Bill Taylor’s 7.5 inch AVR—the route of the hazelnuts.

For a treat, visit one of the oldest home layouts in the city: Don McKinnon’s Malamute & Klondike. It was in the same house for 63 years in the same house until Don passed away in 2013. (Must be some kind of record.)

And I suppose not layout hop in Winnipeg would be complete without a visit to my own layout, the Manitoba & Minnesota Sub., or my N scale Thompson River Canyon hollow core door layout.

Thanks for coming on the hop! Hope you had a good time.