Friday, November 8, 2019

Week of Remembrance: Callum Wilcox's Amiens Tracks & Trenches 1918



In this week of remembrance, here’s a unique layout by British modeller Callum Willcox that recalls  the contribution made by railway troops during that conflict.

Willcox, 24, created the 009-scale military trench railway layout in 2018 to mark the centennial of the ending of World War One.














Called Amiens 1918—Tracks & Trenches, it remembers the battle of Amiens, one of the last major battles of the war.














Willcox’s layout is set during the battle. It depicts a recaptured artillery battery that has become an Allied field headquarters and supply depot.

A narrow-gauge field railway serves the troops, using a mixture of British, U.S. and French locomotives and captured German rolling stock.














The layout is the result of his interest in railways and military history. Through it, he wanted to combine both interests.

He started construction of the 2 by 4-foot layout in the spring of 2017, with the aim of getting the layout finished for the start of 2018, ready for the commemorations.


  













Watch a video of this amazing layout here. 

See more photos on Willcox’s Facebook page. (Scroll down a ways.)
















Willcox isn’t the only modeller making war-themed layouts. Find more here.

For other posts on this blog about railways and war, click here.

Information and some photos from Model Rail magazine. 


























Callum with his layout. 

Sunday, November 3, 2019

Saving and Moving a Layout: The David Lee Model Railroad Story


David Lee sees his layout for the first time in its new location.
















For most model railroads, the end of the line is a dumpster. But a few are dismantled and moved into a new home. 

That’s what happened to David Lee’s HO scale layout in Hamilton.

Lee, Master Model Railroader #26, was the proud owner of a 26 by 30-foot HO scale layout in the basement of his home.

In 2015, due to health and age, it was time for Lee and his wife, Ruth, to downsize.

Before Lee moved, Hamilton Spectator columnist Paul Wilson wrote an article about how the layout was soon to become a memory.

At the same time the article appeared, Dr. John Kelton was looking for a layout to occupy a public space in the new David Braley Health Sciences Centre in that city.

Friends of Kelton, knowing he was looking for a layout, brought it to his attention.  

"I went into the basement and gasped," Kelton told the Spectator. "The amount of work that has gone into that ... I've never seen anything so joyously creative."

He immediately wanted it for the Centre. But how to move it?

That’s where the Dundas Modular Railway Club comes in. In the article below, club member Tony Czerneda describes the process.

David Lee passed away January 19, 2019 at the age of 84. Fortunately, he was able to see his layout in its new home before he died.

Here's Tony's report.

The History

In 2015, Mert Hambly, the former superintendent of the Dundas Modular Railway Club, told club members they had an opportunity to help move and put back together David Lee’s layout at the Centre.

Many members were skeptical; how do you take down a layout that had existed in a basement for 40 years and put it back together?

Despite misgivings, the club decided to get involved. In April 2015 work crews went to David’s house and started the process. 

The Layout

Before describing how the layout was dismantled, one needs to understand how it was constructed.

David with his layout in his home.



















In David's case, he planned the layout as part of the new family home when it was constructed in the late 1950s.

In the basement, David had the block work of the outside walls installed with 2-inch slots at the 3-foot level.

When it came time to start the railroad, he inserted 2'' x 5’’ lumber into the slots on three walls and built the shelf layout on this base.

On the fourth wall he used an open frame/girder type benchwork and used L-girder benchwork for an island in the middle of the room.

The layout was constructed of a combination of solid plywood for the largely flat areas and risers and subbase in other areas.

Dismantling the Layout

Prior to dismantling, numerous photos and videos were taken of the layout. Then the work began.

Members of the club take the layout apart.












Anything that could be taken off the layout (rolling stock, locomotives, buildings, vehicles, people and animals) was removed and placed carefully in large plastic totes. 

Since the layout was to be stored for a period of time, it had to be put into specially-made crates small enough to get up the stairs and out of the basement.

More cutting the layout apart.















Dismantling started with the centre island. Cuts were made so as to cause a minimum of damage to scenery and track work; switch locations were avoided above all.

Lifting out the engine terminal section.















Each cut out piece was sequentially identified, with its location recorded on a copy of the track plan.

Part of the layout in a crate, ready to be moved.















The pieces were then stretch-wrapped and secured to their crate base and the crate numbered to correspond to the piece inside. A total of 27 crates were required.

Rebuilding the Layout

By mid-May of 2015 the whole layout had been cut into smaller pieces and crated. All crates were then shipped to the David Braley Health Sciences Centre and placed in storage.

The layout's new home.












In January 2016 the club started to piece together some parts of the layout based on drawings from the architects for the Centre.

The plans from the architects showed two separate sections for the layout, a west and east section. On August 1, 2017 the layout pieces were moved into the final position.

Over the next few months, the layout pieces were screwed together, wiring was connected, fascia was applied, and track and scenery work finished.

A photo from inside the new home.












On November 3, 2017, it was opened officially opened with David present. In early 2018, it was opened to the public. 

Three trains can be operated, started by push buttons. Once started, they run for four minutes each.

It has been an incredible journey.

See a video of the layout here.

Some of the dismantling crew.















For a story about another layout that was moved, click here to see photos and read about how Harry Clark’s Indian Creek Valley—located in its own building (see photo below)—was moved.






Saturday, November 2, 2019

Another Look at the St. Jacobs & Aberfoyle Great Model Railroad




In an earlier post, I wrote about my behind-the-scenes visit to the St. Jacobs and Aberfoyle Model Railway.

This post is of the more conventional variety—what visitors normally see when they visit this astounding layout in St. Jacobs, Ontario.
















It is simply impossible to overstate how magnificent it is. Even more amazing is how club members moved it to its present location from its former home near Guelph.

Apparently, they cut it into 51 pieces before reassembling it in the new building. Some former scenery couldn’t be saved and was rebuilt.




















Talking to one of the volunteers, he told me that if the club was forced to move again, he doubted it could be put back together again.

There simply wouldn’t be enough people or expertise, he suggested.
















Let’s hope that doesn’t happen. The club will need to renegotiate their lease next year; I hope that all goes well, and it can continue to bring the transition era in southern Ontario alive for many more years to come.

Meantime, enjoy the photos! For more photos and info about the layout, check out these other posts and links.

Click here to watch a video of the layout.










































































Sunday, October 27, 2019

Behind the Scenes at the St. Jacobs and Aberfoyle Model Railway




















It’s been seven years since I first saw the Aberfoyle Junction O scale layout—one of Canada’s finest layouts.

Back then, it was still located at its original and long-time location near Guelph, Ont.

Now called the St. Jacobs and Aberfoyle Model Railway, it is located in nearby St. Jacobs, Ont., its home since 2013.





















I was able to visit the layout again this month; once again, I was overwhelmed. There are simply not enough words to describe how magnificent it is.

This time around, a volunteer generously offered to let me see behind the scenes. I got to go behind the layout to see the staging yards, and also up into the control booth located on the second floor above the trains.

















Engineers control the trains from their perch on the DC block-controlled layout—something that is only possible with the use of cameras so they can keep an eye on the staging yards, switches and magnets for uncoupling.
















In addition to the behind-the-scenes photos, I took many other pictures. I’ll post them over the next couple of posts.